Saw, Cut-Off, Evolution Rage2 355mm for steel, aluminium or wood

Print
Saw, Cut-Off, Evolution Rage2 355mm for steel, aluminium or wood – This incredible cut off saw comprehensively out-performs abrasive saws. Featuring patented RAGE® technology, and utilising a TCT blade rather than an abrasive wheel, the RAGE2 will easily
Description

Saw, Cut-Off, Evolution Rage2 355mm for steel, aluminium or wood – This incredible cut off saw comprehensively out-performs abrasive saws. Featuring patented RAGE® technology, and utilising a TCT blade rather than an abrasive wheel, the RAGE2 will easily cut Steel, Aluminium and Wood (even wood with nails), using just one blade. The cut is fast, clean with no burr and virtually no sparks. When cutting Steel, the RAGE2 cuts cold, no coolant is required, and because the material is cold it can be handled and worked on immediately. The impressive performance is economical too, offering up to 750 cuts in mild Steel box section* before a replacement blade is needed Technical Specifications: Motor (230v or 110v ~ 50Hz): 1800W Maximum Box Section (6mm Wall 90°): 120 x 120mm Maximum Box Section (6mm Wall 45°): 89 x 89mm Rectangle (6mm wall 90°): 95 x 180mm Rectangle (6mm wall 45°): 78 x 110mm Round (6mm wall 90°): 130mm Round (6mm wall 45°): 105mm Speed (No Load): 1450min-1 Machine Weight: 25.08kg Product Dimensions (HxWxL): 620mm x 315mm x 640mm Recommended Maximum Duty Cycle: 30mins Sound Pressure Level (Under Load): 107.7dB(A) Vibration Level: 1.39m/s² Gross Weight: 27.4kg Packaging Weight: 2.32kg Packaging Dimensions (HxWxL): 464mm x 390mm x 575mm Blade Specifications: Maximum Diameter: 355mm Number Of Teeth: 36 Bore Diameter: 25.4mm Thickness: 2.4mm Blade Weight: 1.35kg Packaging Dimensions: 458mm x 407mm x 6mm Packaging Weight: 0.23kg - 7035161/2

ABRAWEB OFFER

 

T/A 165i MMA Inverter 240v

Capable of 3.2mm electrode 

    In carrycase c/w leads   

             £199 plus vat                                                                                                                       

LIMITED OFFER !

 HYPERTHERM PMX30AIR 

       PLASMA CUTTER

 Impressive 10mm capacity 

     Built-in Compressor   

LIMITED OFFER TO MID-FEB

 AT VERY SPECIAL PRICES !

    DEMOS UPON REQUEST

      

   Should you be using

    Ceramic Flap Discs ?

  Check the cost saving !

OpTeArc Mig Units

      CHECK OUT THE

      NEW RANGE OF 

   OPTeARC MIG UNITS

     DEMOS AVAILABLE

       UPON REQUEST

Stockists of INE Quality Products

Agents for