Kemper 3m Fan Exhaust System 79003201

Print
Kemper 79003201 Fan Exhaust Set with 3 metre Flexible Exhaust Arm
Description

Kemper 79003201 Exhaust Set with 3 metre Flexible Exhaust Arm
The KEMPER exhaust set consists of a 3 m, long exhaust arm, a fan with wall bracket and a motor protection switch. For use where it is not absolutely necessary to filter the air.

Alternative lengths including 4 metre are available.

KEMPER exhaust arms are excellent for the extraction of welding smoke, gases, vapors, light dust and solvents.

The hose-type exhaust arm consists of an internal parallelogram support linkage with spring support and a polyester fabric reinforced hose with PVC coating with coiled steel wire bonded in. The 360° rotating evacuation hood with throttle valve can be swiveled in all directions.

The fans were designed especially for connection to KEMPER exhaust arms.The housing and impeller consist of non-sparking, cast silumin. The impeller is balanced statically and dynamically.This ensures perfectly smooth operation and minimum noise development. The housing has a powder finish. Including connection flange for Ø 160 mm exhaust pipe

Specification.

·        Length 3 m, Ø 150 mm

·        Fan: 2.000 m³/h, 0,75 kW

·        Power Supply 3 x 400V/50Hz

 

 

 

ABRAWEB OFFER

 

T/A 165i MMA Inverter 240v

Capable of 3.2mm electrode 

    In carrycase c/w leads   

             £199 plus vat                                                                                                                       

LIMITED OFFER !

 HYPERTHERM PMX30AIR 

       PLASMA CUTTER

 Impressive 10mm capacity 

     Built-in Compressor 

 AT A VERY SPECIAL PRICE !

    DEMOS UPON REQUEST

      

   Should you be using

    Ceramic Flap Discs ?

  Check the cost saving !

OpTeArc Mig Units

      CHECK OUT THE

      NEW RANGE OF 

   OPTeARC MIG UNITS

     DEMOS AVAILABLE

       UPON REQUEST

Stockists of INE Quality Products

Agents for